Viewed through a camera lens, sometimes an LED light bulb appears to be blinking rapidly at regular intervals as if it were blinking quickly. Flickering light in a video becomes more prominent and noticeable as the camera’s frames per second (FPS) recording is not compatible with electrical frequency. This is known as the ‘flash effect’. LED lights are of two types, flash and steady.


What are the causes of LED light flickering in video?

We can see that the light is flickering because it really happens, but this flickering of the LED light is imperceptible to the human eye as it happens so fast. To find out why the LED lights flicker in the video, let’s understand why.

LEDs operate on alternating current (AC) where electrons in the current move in cycles (inside and outside the circuit). Electron cycles in one second are known as Hertz or Hz. At 1 hertz or cycle, the bulb goes out twice. Since the electron is moving in and out. 5 Best Types of Rice for Belly Fat Loss 2022

Except for the USA, electricity in the world operates at 50Hz, and in the USA at 60Hz. This means that the bulb actually turns on and off 100 to 120 times per second. Our eyes cannot see this flicker, but a camera lens can make it easier for you to see this flicker. While playing or recording a video, we can observe flickering on the screen.

A camera often opens and closes its motion capture shutter slightly faster than at the speed of a flickering LED light. When the LED light on the screen instantly flashes black, this picture was taken by the camera as the light turns off on its own cycle. When the frequency of the camera’s frame rate per second and the LED light do not match, the flickering of the light becomes evident on the camera screen. Moto G62 Specifications, Price, and renders leaked online

How Can I Stop the LED Flickering on a video or camera screen?

For some people it is annoying to see the light flickering. While not completely eliminating this effect, there are some ways that can help reduce it. Here are some ways to reduce camera shake:

Adjust the FPS

Fast FPS speed allows your camera to record more details, thus making the flickering effect more obvious than it is. The more frames per second it takes, the higher the chance of catching a flicker effect in the video, which leads to that spooky effect. The occurrence of this effect can be reduced by lowering the FPS in the camera setting. In case it doesn’t work, you can check the bulb itself for any flickering issues. iQOO Z6 Pro 5G Full Review: Best Performance Smartphone

Adjust shutter speed

Shutter speed plays an important role when it comes to capturing details in the frame. To set the shutter speed, you need to know the frequency of the power supply. The shutter speed can be adjusted manually, and it is recommended to set it to a multiple of 50 or 60. The difference depends on the area you’re shooting video in. In the US, you have to use multiples of 60, and everywhere else multiples of 50 will work. The reason this trick works is the difference in the frequency (Hertz) of the current.

For example, if you’re shooting a video with a power supply using 60 Hertz, you’ll have a shutter speed set to intervals divisible by 60, i.e. 1/60, 1/120, etc. You may need to shoot at 30fps. It will reduce the vibration effect. Some LED lights come with drivers that have the ability to adjust their on and off cycles. Setting vibration rates higher than your camera’s frame rate can effectively eliminate the flash effect. Top 10 Best Investment Options to Get Higher Return in Future

Adjust the brightness of the light source

Another way to reduce flicker is to adjust the brightness of the light, if possible. Dull light will have a less flickering effect. But having a darker frame would be an issue. So you can adjust the camera’s settings to overcome the opacity of the light source.

Move away from the light source

This is the easiest way to reduce vibrations to get caught on a video. When you move away from the light source, the light loses its brightness and its reflectivity decreases. It will make ‘quieter’ capture possible. But this method has a downside. The further you move away from the light source, the darker the frame will become and you will need to adjust the aperture and exposure accordingly. Therefore, it is important to strike the right balance between these two things, otherwise you will end up with dark or overly bright images. Moto E32s First Impressions, Specs & Pricing: A Good Looking Budget Smartphone

The sun does not flicker

Remember that the sun is a constant source of light, so you can shoot video on any setting of your camera while you’re outside, no matter what country you’re in. Note that the light in the camera only flickers if there is light. Artificial light in video when outside and using the wrong camera setting.

Also, keep in mind that not all artificial lights flicker. More costly and specialized studio lights are created to vibrate at an extremely high frequency, so they appear as truly stable light sources and completely eliminate the flickering problem. HBSE 10th 12th Result 2022 Released – How to Check Result 2022

Other ways to stop the LED light from flickering on the camera screen

Below are some helpful tips to fix or prevent video flickering.

If you turn on the lamp with the help of the battery, the flickering on the screen will disappear.

Avoid using slow-motion for indoor shots, instead only use this feature outdoors. Maybe not day and night. You can apply the slow-motion effect after production. NEET-PG exam results are out. Here’s how you can check results

What Causes The Flickering Effect In The Video?

What if I told you that LEDs don’t flicker in video, but always flicker in real life?

Because that’s exactly what happens. Our human eye cannot see the flickering of the LEDs occurring in front of us because it is so fast.

To understand why the LED flickers in video, let me explain the pure science behind it.

LEDs are powered by alternating current AC where electrons in electricity come and go in cycles.

The cycle of electrons per second is called Hertz (Hz). At 1 cycle, or Hertz, the bulb actually goes out 2 times as the electron changes in and out.

In the USA electricity operates at 60 Hz and in the rest of the world at 50 Hz. This means that the bulb turns on and off 100 to 120 times per second.

Although our eyes can’t see this flicker, seeing the LED through a camera lens makes the flicker obvious. We can see this happening on our screen while recording or playing a video.

Often times, a camera will open and close its motion capture shutter slightly faster than the speed of a flickering LED.

When we saw the LED on our screen blink black for a second, this image was captured by the camera as the LED turned off in its current loop.

When the camera’s frame rate per second (FPS) frequency and the LEDs do not match exactly, flicker becomes visible on the camera screen.

Should I Worry That The LED Is Not Working Properly?

The flickering of the lights has nothing to do with the quality or condition of the LED bulbs. In fact, you can be sure that your LEDs are working as they should.

Your only concern should be if you can actually see the LEDs flickering with your own eyes.

Sometimes when your eye can’t really see the flicker and the LED isn’t flashing fast enough, your brain can still pick up on this unnatural light effect and cause headaches, nausea and vision problems.


Please enter your comment!
Please enter your name here